Akagashi Flush Cut 170

This flush-cutting saw with its extremely fexible blade leaves a very smooth cut surface with no scratch marks. The razor-sharp toothing finishes the job. Due to an extra-short handle, this saw may be used in confined and tight spaces.

This Akagashi range of saws allows combining any of 5 handle sizes and styles with any one of 10 interchangeable blades.

The eight complete as-supplied saw options are here

• T1287 - Universal 270, O'all 520mm, Blade 60 x 0.6 x 270mm, Kerf 0.75mm, Crosscut, Pitch 1.9mm/13tpi
• T1288 - Rough 270, O'all 520mm, Blade 60 x 0.6 x 270mm, Kerf 0.8mm, Crosscut, Pitch 1.9mm/13tpi
• T1289 - Fine 250, O'all 500mm, Blade 60 x 0.5 x 270mm, Kerf 0.8mm, Crosscut, Pitch 1.4mm/18tpi
• T1290 - Extra Fine 180, O'all 410mm, Cut depth 22mm, 0.3 x 150mm, Pitch 1.0mm/25tpi
• T1291 - Rough 210, O'all 410mm, Blade 35 x 0.6 x 210mm, Kerf 0.9mm, Crosscut, Pitch 1.9mm/13tpi
• T1292 - Flushcut 170, O'all 335mm, Blade 35 x 0.4 x 210mm, Crosscut, Pitch 1.0mm/25tpi
• T1293 - Keyhole 150, O'all 340mm, Blade 10~15 x 0.6 x 150mm, Kerf 0.8mm, Crosscut, Pitch 1.6mm/16tpi
• T1294 - Rip 250, O'all 490mm, Blade 60 x 0.5 x 250mm, Kerf 0.7mm, Graduated Rip, Pitch 1.7~3.5mm

The five handle Options are here

• T1280 - straight 215mm
• T1281 - straight 175mm
• T1282 - straight 135mm
• T1283 - bent 165mm
• T1284 - bent 125mm

The 10 blade options are here

• L1040 - Rough 270, 60 x 0.6 x 270mm, Kerf 0.8mm, Crosscut, Pitch 1.9mm/13tpi
• L1041 - Fine 250, 60 x 0.5 x 270mm, Kerf 0.8mm, Crosscut, Pitch 1.4mm/18tpi
• L1042 - Rough 210, 35 x 0.6 x 210mm, Kerf 0.9mm, Crosscut, Pitch 1.6mm/16tpi
• L1043 - Keyhole 150, 10~15 x 0.6 x 150mm, Kerf 0.8mm, Crosscut, Pitch 1.6mm/16tpi
• L1044 - Semi fine 250
• L1045 - Hardwood 210
• L1046 - Flushcut 170, 35 x 0.4 x 210mm, Crosscut, Pitch 1.0mm/25tpi
• L1047 - Rip 250, 60 x 0.5 x 250mm, Kerf 0.7mm, Graduated Rip, Pitch 1.7~3.5mm
• L1048 - Rough 270, 60 x 0.6 x 270mm, Kerf 0.8mm, Crosscut, Pitch 1.9mm/13tpi
• L1049 - Universal 270, 60 x 0.6 x 270mm, Kerf 0.75mm, Crosscut, Pitch 1.9mm/13tpi
  
  Detail Of The Handle To Blade Junction