Liogier rasps are manufactured in a small, family owned and run business near Lyon in France. These rasps have been produced at Liogier for many generations and are the gold standard for sculptors, cabinetmakers and any working of wood which requires hand shaping and finishing.
Hand cut rasps out perform machine made rasps because of their slight tooth irregularities. Each tooth is cut by hand using an appropriately sized and shaped punch and the tool is then hardened by one of two processes, the Traditional and the Sapphire. Traditional hardening is measurable on the Rockwell scale.
A traditional rasp measures about Rockwell 62 (about 800 Vickers) however the Sapphire hardening process is off the Rockwell scale and measures an astounding 3800 on the Vickers scale. Sapphire rasps are the tool of choice if you work man-made composites, extremely abrasive woods or even soft metals.
Stocking and Availability
The factory makes rasps more or less to order and as distributors for Australia and New Zealand, apart from a couple of dozen of the range which we stock - see Stock On Hand below - we also often order against firm orders. There is no other feasible business model possible to support such a luxury of choice; over 20 different hand rasp ranges, an extensive rotary rasp range and no fewer that 268 riffler options across 7 patterns and 7 lengths which amount to well over 1400 purchasing options in total.
Stitches
Rasps are available in a range of teeth size and densities from Stitch #2 to Stitch 15.
Rasps for Lefties
Liogier rasps are available with teeth cut for either left or right handed use. The price does not vary.
Right handed rasps will be supplied by default. Lefties please email for your requirements.
A Suggested Starter Set?
If you get lost in the depths of our range designed for wood lovers, know that the most frequently used tools to start are:
- the Cabinet Makers rasp 250mm Stitch #9, or 200mm Stitch #11.
- the Rat Tail rasp, 200mm Stitch #12.
- the Wood Riffler #1, 175mm Stitch #13.
Buying Guide
Whilst there are many options the manufacturers provide these popularity tables as a guide to what to purchase.
If your requirements are mainstream these rankings are very useful but bear in mind it is only a guide and if your needs are not mainstream you will likely be interested in unusual patterns.
CABINET MAKERS
See HERE to purchase.
HALF ROUND
See HERE to purchase.
MODELLERS
See HERE to purchase.
FLAT
See HERE to purchase.
See HERE to purchase.
See HERE to purchase.
See HERE to purchase FLAT.
See HERE to purchase CURVED.
PLUMP
See HERE to purchase.
VERY TAPERED
See HERE to purchase.
CURVED
See HERE to purchase.
GUNSMITH
See HERE to purchase.
BOOTMAKERS
See HERE to purchase
SAGE LEAF
See HERE to purchase.
| ROTARY 15mm | ROTARY 25mm | ROTARY 32mm |
| See HERE to purchase. | See HERE to purchase. | See HERE to purchase. |
|
|
|
|
RIFFLERS
See HERE to purchase.
Rifflers for wood are available variously across 7 patterns and 7 lengths 150, 160, 175, 200, 225, 250 and 300mm.
Some Cross Section Details
